Description
eck Cleaner is a powerful cleaner and brightener that removes ground in and surface dirt while restoring a bright, vibrant look to fiberglass and grey, weather-beaten marine wood such as teak and mahogany that is unfinished, to its natural colour without bleaching. Unlike bleach or chlorine-based cleaners, Deck Cleaner will not damage the wood’s fibres. Deck Cleaner is fast-acting and can restore the original colour of your wood surface in as little as 20 minutes with no laborious and backbreaking sanding! It is safe to use on all wood species including teak, iroko, mahogany, oak, larch and pine and is also an excellent degreaser for use on tropical hardwoods to allow finishes like Deks Olje D1 to penetrate.
Deck Cleaner can remove rust stains and will also neutralise wood surfaces which have been stripped with a stripping product such as Owatrol’s Marine Strip, leaving the surface ready for applying your chosen finish. Deck Cleaner can also be used to restore the lustre to faded plastics and fiberglass dulled by weathering and UV rays. Deck Cleaner is biodegradable and does not contain solvents or bleach, you can rinse it simply with water.
Ideal Uses for Deck Cleaner
- Reviving neglected decks and handrails
- Neutralising stripped surfaces before applying a finish
- Degreasing tropical hardwoods to aid penetration of your chosen finish
- Cleaning previously coated wood surfaces which are dirty
- Lightening and restoring greyed weathered marine wood
NOTE: Wear chemical resistant gloves, safety goggles and protective clothing
Application of Deck Cleaner
Caution: Surfaces may be slippery when wet. Use caution when walking on wet surfaces during application. Deck Cleaner may dull painted surfaces and some metal fixings if left on too long. Rinse off quickly or wipe with a wet cloth.
Applying Deck Cleaner to Wood
First wet surface with fresh, clean water. Then apply Deck Cleaner with a synthetic brush or roller (medium or long pile) and scrub the surface with a stiff nylon or synthetic brush. Leave it to stand for approximately 10-20 minutes. If the surface starts to dry, dampen it with a mist application of water.
After waiting for 10-20 minutes, scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar). If required, repeat the procedure. Allow the wood to dry for 48 hours or until the wood meets the moisture content required by the chosen finish.
Applying Deck Cleaner to Plastic or GRP
First, wet the surface with fresh clean water. Next, apply Deck Cleaner using a brush and leave it for 10-20 minutes to work. Now scrub the surface with a soft or medium nylon scrubbing brush and rinse with large amounts of fresh clean water.
Applying Deck Cleaner to rust stains
First, wet the surface with fresh clean water Then apply Deck Cleaner with a stiff nylon scrubbing brush working it into the rust stain.
Leave it to work for a minimum of 10 minutes or until the stain has gone. Then scrub the surface with stiff nylon scrubbing brush and rinse with large amounts of fresh clean water.
Clean Up
Clean all tools used with soap and water.
After Clean Up
We recommend protecting and enhancing the natural beauty of your wood with Owatrol penetrating wood finishes.
Things to Remember
- Shake container thoroughly before use.
- Cover any areas you want to protect.
- Thoroughly wet surrounding plants and shrubs.
- Apply between 5˚C and 35˚C.
- Do not apply on a hot surface as the product will dry too quickly.
- If cleaning vertical wood, work from bottom to top to avoid streaking