Description
Hammerite No.1 Rustbeater provides a high build finish to heavily pitted areas of rust and prevents new rust forming
Corrosion resistant
Compatible with most topcoats
Can be applied direct to rust
Anti-corrosive primer for ferrous metals
Solvent based
| Product Type | Special product |
| Short Description | Hammerite:Ultimate metal protection. |
| Drying time (recoat) | 6 hours |
| Drying time (touch dry) | 2 hours |
| Suitable Surface | Metal |
| Coverage | 12m2per litre |
| General No. of Coats | 2 |
| Application description | Ideal application temperature is 8 to 25degC. Stir paint thoroughly before use.By brush: apply 2 coats, allowing 6 hours between coats. Ensure corners and edges are well covered. Apply topcoat after 6 hours. By roller: apply 2 thick coats. Thin with Hammerite Brush Cleaner & Thinners at 9 parts paint to 1 part thinners. Brush in edges first before using roller. A suitable Hammerite topcoat/paint system must be applied after a minimum of 6 hours. For best results allow 24 hours. |
| Cleaning | After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners or white spirit |
Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains 2-butanone oxime. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking